ATEN VE892 HDMI Optical Extender (1080p@20km)

Aten

$1,967.00
Part Number:
VE892
Availability:
Contact us for availability
1:
HDMI Optical Extender (1080p@20km)
2:
Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable
3:
Very long distance transmission - up to 20km
4:
Free USA Shipping
5:
2-Year ATEN Warranty
6:
Lifetime Telephone, CHAT, TEXT & Email Support
7:
Add'l Discount to .EDU & .GOV & .MIL & .ORG
ADD OPTIONS:
This Aten VE892 HDMI Optical Extender (1080p@20km) overcomes the length restriction of standard HDMI cables by using optical fiber to send high definition audio and video signals over large distances.

The VE892 accepts an audio-video stream from a local source and serializes the data to pass it over a single 3.125 Gbps optical link (for resolutions up to 1080p@60Hz at 24-bits).

The VE892 can also extend the IR remote control and transfer RS-232 (up to 115kbps) in both directions, allows you to connect serial devices such as touch screens and barcode scanners.

ATEN VE892 HDMI Optical Extender (1080p@20km) Features:

  • Extends the transmission range of HDMI, IR and RS-232 signals using one fiber optic cable
  • Very long distance transmission - up to 20km
  • HDMI (3D, Deep Color), HDCP compatible - signaling rates up to 3.125 Gbits
  • Superior video quality - up to 1080p@60Hz
  • Supports full frequency IR signal from 30KHz to 60KHz
  • (The IR receiver cable included with the package only supports 30 KHz to 56 KHz)
  • Uses one fiber optic cable to connect the local and remote units
  • Supports wide screen formats
  • Built-in 8KV/15KV ESD protection
  • Features RS-232 serial port for connecting peripherals such as touch screens, barcode scanners, etc.
  • Supports bi-directional IR signal transmission, one way at a time
  • Rack-mountable
  • Hot-pluggable

NOTE: Many Aten products, bought here at HDTV Supply, comply with the USA Governments TAA requirements. TAA requires that products originate from the United States or another approved country. These Aten products, bought here at HDTV Supply, do not ship from China. Call us at 833-965-3722 if you want more info on Aten TAA Complaint Products.

Why not buy this ATEN VE892 HDMI Optical Extender (1080p@20km) today?

ATEN VE892 HDMI Optical Extender (1080p@20km) Specification:

Function VE892R VE892T
Video Input
Interfaces N/A 1 x HDMI Type A Female (Black)
Impedance N/A 100 Ώ
Max. Distance N/A Up to 1.8 m
Video Output
Interfaces 1 x HDMI Type A Female (Black) N/A
Impedance 100 Ώ N/A
Video
Max. Data Rate 6.75 Gbps (2.25 Gbps Per Lane) 6.75 Gbps (2.25 Gbps Per Lane)
Max. Pixel Clock 225 MHz 225 MHz
Compliance HDMI (3D, Deep Color)
HDCP 1.4 Compatible
HDMI (3D, Deep Color)
HDCP 1.4 Compatible
Max. Distance 1 x SFP Module (*Note)
20km @ Single mode (SM) fiber
1 x SFP Module (*Note)
20km @ Single mode (SM) fiber
Max. Resolution Up to 1080p Up to 1080p
Audio
Input N/A 1 x HDMI Type A Female (Black)
Output 1 x HDMI Type A Female (Black) N/A
Connectors
Unit To Unit 1 x bi-directional SFP (LC) 1 x bi-directional SFP (LC)
Power 1 x DC Jack 1 x DC Jack
Power Consumption DC5.3V:5.80W:27 DC5.3V:4.69W:22
Control
IR Channel 1 x Mini Stereo Jack Female (Black);
30~56 KHz full range transmission
1 x Mini Stereo Jack Female (Black);
30~56 KHz full range transmission
RS-232 Channel 1 x Terminal Block, 3 pole (Green) 1 x Terminal Block, 3 pole (Green)
Environmental
Operating Temperature 0-40˚C 0-40˚C
Storage Temperature -20 - 60˚C -20 - 60˚C
Humidity 0 - 80% RH, Non-Condensing 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal Metal
Weight 0.44 kg ( 0.97 lb ) 0.44 kg ( 0.97 lb )
Dimensions (L x W x H) 14.17 x 10.30 x 3.00 cm
(5.58 x 4.06 x 1.18 in.)
14.17 x 10.30 x 3.00 cm
(5.58 x 4.06 x 1.18 in.)
Note 1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fi ber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fi ber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifi cations.
1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fi ber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use a Single Mode optical fi ber cable that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifi cations.
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.