WolfPack 4K 8x16 HDMI Matrix Router via HDBaset

WolfPack

$2,800.00
Part Number:
2-HDTVIM88HDBASET
UPC:
728350686032
Availability:
Contact us for availability
1:
WolfPack 4K 8x16 HDMI Matrix HDBaseT Router
2:
Has 8-4K 1X2 splitters
3:
Has 16-separate 4K HDBaseT HDMI Extenders
4:
Created for budget conscious installations
5:
Optional Control4 Drivers
WolfPack HDMI Switchers HDTV Supplys WolfPack BUNDLED 4K 8x16 Pseudo HDMI Matrix Router Over HDBaseT is made up of a true 8x8 HDMI Matrix Router with 8 - separate 1X2 HDMI video splitters on the 8-matrix outputs giving you 16 outputs. Each of the 8 - matrix outputs will go in to each 1X2 splitter with both splitter outputs having the same picture. Then each of the total 16-outputs will go to 16-separate HDBaseT HDMI extenders that can extender the HDMI signal up to 115 feet. The HDBaseT HDMI extenders are made up of 16-POE transmitters and 16-HDMI receivers and 16 - AC adapters.

The WolfPack 8x16 HDMI Matrix Router Over HDBaseT design bundle is for applications that that cannot afford a true $8,000 true 8x16 HDMI Matrix Router Over CAT6 and can live with splitting each HDMI output of the matrix. The matrix is 4K up to ~115 feet with CAT6 solid Ethernet cabling. Non-4K can go up to 220 feet.

This WolfPack 8x16 HDMI Matrix Router Over HDBaseT provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any of the eight HDMI source devices to the remote displays at the same time. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination.

The WolfPack 8x16 HDMI Matrix Router Over HDBaseT bundle is made up of

Again, each of the 8-matrix outputs will go in to each 1X2 splitter with all 2-splitter outputs having the same picture. This means if you change TV channels it will change the picture on 2-TVs. If you do not want that see our true 8x16 HDMI Video Matrix Switchers.

HDTV Supplys eight (8) 1x2 HDMI Splitters with EDID are designed to amplify and distribute the input HDMI signal to 2 HDMI outputs simultaneously and stores 16-presets of EDID settings to offset EDID problems in your system. The 1x2 HDMI Splitters with EDID also repeats the digital audio embedded in the HDMI signal and outputs it via optical SPDIF and/or a 3.5mm RCA L/R stereo audio out for connection to an amp, surround sound receiver or powered speakers. By having the audio coming out of the splitter you eliminate audio and video being out of synch.

This WolfPack 8x8 Matrix HDMI Switch supports a LAN & RS232 Control and comes with a remote control. It can be controlled via the front panel buttons, a LAN & the RS232 serial port. If your budget conscious application requires a remote control, see 8-8 HDMI Matrix Router with 20-button remote control.

Why not buy this WolfPack 8x16 HDMI Matrix Router Over HDBaseT today?

8x16 HDMI Matrix Router Over HDBaset Specs:

  • Interface HDMI-A
  • Input cable distance: ~25 feet AWG22 HDMI 1.4 high speed cable
  • HDMI version HDMI 1.3
  • Bandwidth 300MHz
  • Resolution Up to 1920x1080p@60Hz, 3D
  • Clock Jitter <0.15 Tbit (1080p@60)
  • RiseTime <0.3Tbit (20%--80%)
  • RiseTime <0.3Tbit (20%--80%)
  • Transmission Delay 5ns
  • Amplitude T.M.D.S +/- 0.4Vpp
  • Differential impedance 10015ohm
  • RS232 control
  • Baud rate and protocol Baud rate:9600,data bit:8, stop bit:1,No parity checking
  • Max Consumption 20W
  • Adapter 12V/3A
  • Matrix Mechanical dimensions Size(mm) 430(L)X220(W)X44 (H)
  • Weight 3Kg

8x16 Pseudo HDMI Matrix Router Over HDBaset Contents:

  • 9 - Power Adapters
  • 1 - CD
  • 1 - User Manual
  • 1 - Matrix
  • 8 - separate 1X2 splitters
  • 16 - HDBaseT HDMI POE extenders (transmitter and receiver) plus 16 - AC adapters

Why not buy this 8x16 HDMI Matrix Router Over HDBaset today?

To ensure 3D or 4K content routing through the Matrix, High Speed HDMI cables must be used and any connected non-3D or non-4K compatible display must not have an "active" HDMI output (i.e. powered off or in standby mode). The 4K or 3D source player must not be able to "see" a 2D or non-4K only display connected to the Matrix.

Read more at WHAT I NEED TO KNOW ABOUT EDID

Q: Does this HDMI Matrix Switch support an IR remote?
A:
Yes.

Q: I see the the HDMI extenders come with 2-remote IR cables, will the remote IR work with this matrix?
A:
No, the cables are used when the application has one source and one widescreen. They can't be used with this matrix and need to be set aside and not used.

Q: Can I use unpowered HDMI over CAT6/6 extenders with this matrix?
A:
We don't recommend them with our matrices, or anyone else's, due to them consuming power from the matrix and the matrices are not designed to power many external devices.

Consider the example of 9 - HDMI balun transmitters that need 0.5a amp each to power it times 9 or 4.5 amps the matrix would have to supply. The power supply of this matrix is rated at 12v at 3.5 amp so in that example the matrix would probably break down and your warranty may be voided. See the companion powered HDMI extenders in the above OPTIONS that have 2-AC adapters.

HDMI cables with built-in boosters also consume power also and we don't recommend more than 2, if at all. You must use our low power ones, also.

Q: Do the optional HDMI extenders support Remote IR?
A:
They send perfect audio and video but the remote IR doesn't support this device as it only works with with 1-source & 1-TV. See our RF remote controls if you want to control all your devices from afar.

HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.

If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com

For Questionnaire Click Here