2x1 SDI Switch - Broadcast Quality

WolfPack

$125.00
Part Number:
2x1-sdi-switch
Availability:
In Stock
1:
2x1 SDI Switch with Fast Switching Technology
2:
Supports 3G-SDI, HD-SDI or SDI to >250 Feet
This 2x1 SDI Switch manually switches two 3G-SDI, HD-SDI or SDI sources to a single output without a switching delay or loss of signal quality. The 2x1 SDI Switch for cutting equipment costs in the studio by enabling shared signal routing and 2X1 SDI Switcher supports source resolutions up to 1080p. The 2X1 SDI Switcher only supports video and does not support audio. There is no video latency with this 2x1 SDI Switch.

2x1 SDI Switch Features:

  • Manually switches 2 input 3G/HD/SDI signals to one output
  • Features equalizer circuitry on the inputs and outputs, allowing it to support long cable runs
  • Can internally be modified from momentary to latching
  • Support for multiple standard and high definition video resolutions:
    • SD 525i and 625i
    • HD 720p @ 24, 25, 30, 50, and 60 Hz
    • HD 1080i @ 50, 60 Hz
    • HD 1080p @ 24, 25, and Hz
    • 3G 1080p @ 50, 60 Hz
  • Support for multiple color spaces:
    • RGB or YCbCr 4:4:4 sampled
    • YCbCr 4:2:2 sampled
  • Supports data rates: 270Mbps~2.97Gbps
  • Supports 8-bit, 10-bit, and 12-bit Deep Color
  • Compatible with the HDcctv 1.0, HD-SDI (ST 292), 3G-SDI (ST 424), and SD-SDI (ST 259) standards
  • Supports data rates: 270Mbps~2.97Gbps
  • Supports 8-bit, 10-bit, and 12-bit Deep Color
  • Audio is not supported, only video
  • Support resolutions of:
    • SD 525i and 625i
    • HD 720p @ 24, 25, 30, 50, and 60 Hz
    • HD 1080i @ 50, 60 Hz
    • HD 1080p @ 24, 25, and Hz
    • 3G 1080p @ 50, 60 Hz
  • Support for multiple color spaces:
    • RGB or Y-Cb-Cr 4:4:4 sampled
    • Y-Cb-Cr 4:2:2 sampled
  • Compatible with the HDcctv 1.0, HD-SDI (ST 292), 3G-SDI (ST 424), and SD-SDI (ST 259) standards
  • Includes an OFF/ON front panel switch
  • Optional SDI surge protector, see above.

2x1 SDI Switch Max. distance using high quality 75Ω Coax Cable like Belden 1694A:

  • 3G (1080p 60Hz) Mode: up to 262 ft
  • HD (720p 60Hz) Mode: up to 393 ft
  • SD (480i) Mode: up to 656 ft
The 2x1 SDI Switch is manually switched from the front panel and 2 small LEDs show which one of the SDI sources you have selected. It comes with an AC adapter and has on OFF/On switch on the front panel.

Why not buy this 2x1 SDI Switch today?

2x1 SDI Switch Specifications:

  • Input Connector 2x SDI BNC Male
  • Output Connector 1x SDI BNC Male
  • Supported Cable Length (using RG59 cable) 3G (1080p 60Hz) Mode: up to 262 ft (80m)
  • HD (720p 60Hz) Mode: up to 393 ft (120m)
  • SD (480i) Mode: up to 656 ft (200m)
  • Dimensions (LxWxH) 3.5" × 3.3" × 1.0" (90 × 85 × 25mm)
  • Weight (Net) 7.0 oz. (200g)
  • Operating Temperature +32 to +158˚F (0 to +70˚C)
  • Operating Humidity 10% to 85% RH (no condensation)
  • Storage Temperature +14 to+176˚F (-10 to +80˚C)
  • Storage Humidity 5% to 90% RH (no condensation)
  • AC Adapter Input 100-240 VAC, 50/60 Hz
  • AC Adapter Output 5 VDC, 2A
  • Power Consumption (Max) 1.5W
  • Regulatory Compliance FCC, CE, UL Listed (C+US)

2x1 SDI Switch Contents:

  • 1 - 2X1 SDI Switcher
  • 1 - AC Adapter
  • Plug and play, doesn't need a Users Manual nor one supplied. Just add cables and then plug into the AC wall outlet.

Why not buy this 2x1 SDI Switch today?

This 2x1 SDI Switch can be used with post-production, TV studio, SDI based surveillance systems, rental & staging facilities, digital cinema or other A/V applications where you need to switch an SDI camera or other device equipped with 3G/HD/SD-SDI outputs to one SDI-compliant display or video processor.
Q: Does this 2x1 SDI Switch have a remote control?
A:
No, the 2x1 SDI Switch is manually switched from the front panel and 2 small LEDs show which one of the SDI sources you have selected. If you need an SDI switch with an RS232 PC control see our 4x1 SDI Switch with an RS232 Port.

Why not buy this 2x1 SDI Switch today?