1x4 DVI Splitter Features:
- Distributes computer DVI graphic signal to four displays simultaneously
- Support DVI-D single link to 1080p
- Use only with PC video cards and monitors that are not HDCP compliant
- Provides high digital resolution up to 1920 x 1200 @ 60 Hz
- Can be cascaded to add additional monitors
- Sends an accurate and reliable reproduction of the DVI digital video signal with no signal attenuation or distortion
- Fully compliant with the DVI 1.0 standard
- Supports HDTV high-definition of 1920x1080 resolution.
- Supports UXGA at the the bandwidth of 165MHz
- Simple plug and play setup for quick connection in minutes
- The 1x4 DVI Splitter connects DVI enabled projectors, monitors, plasma screens, commercial billboards, and wall display systems
- Ideal for graphic design and A/V professionals, training, lectures, and classroom use
- Great for use in trade show, POS, healthcare, airport, train station and bus terminal settings
- Doubles as an extender letting you locate DVI enabled displays up to 33 feet (10 meters) from your computer
NOTE: This 1x4 DVI Splitter is NOT HDCP compliant meaning the older source device and older monitor must not be HDCP compliant to get a picture.
Cascadeable: If you need to add more monitors this 1X4 DVI Splitter can be cascaded with its other family of DVI splitters (See the above SIMILAR tab). Connect a DVI male/male extension cable between a Video Out port of the primary splitter (the splitter connected to the computer) and the Video In port on the cascaded splitter.
Note: The 1x4 DVI Splitter will only output a DVI-D (DVI digital) signal. If you are using a DVI-I cable, it will ONLY pass the digital signal. Using a DVI-I to VGA adapter will not pass an analog signal. A DVI-D to VGA converter is required to convert to an analog signal.
Why not buy this 1x4 DVI Splitter today?
1x4 DVI Splitter Specifications:
- Industry Standards: DVI 1.0
- Video Amplifier Bandwidth: 1.65 GHz
- Max Resolution: 1920 x 1080
- Input Connector: 1 - DVI-I Signal Link Female
- Output Connectors: 4 - DVI-I Signal Link Female
- Cable Distance Source to Display: Max of 33ft (10m)
- LED Indicators: 1 x Power
- Power Adapter: 9V DC (500mA)
1x4 DVI Splitter Contents:
- 1x4 DVI splitter
- 12V/1A DC Power Adapter
- Users Manual
- 1 - 1.5m DVI A-A cable
Why not buy this 1x4 DVI Splitter today?
This 1x4 DVI Splitter will work with the below with the appropriate DVI-D (digital) outputs:
- Any PC that conforms to the resolution in the specs of this DVI device
- Any "Over The Air" (OTA) high definition receiver with DVI outputs
- Any high definition Dish Network and DirecTV receiver with DVI outputs
- High definition TiVo's with DVI outputs
- Any high definition cable receiver with DVI outputs
- and other similar devices with DVI outputs.