1x4 Component Splitter with Gain Controls

WolfPack

Price: $199.95
Today's Price: $124.89
Part Number:
HDTVDA41HP
Availability:
Discontinued
1:
Send one Component video plus audio signal to 4 Component outputs
2:
Individual gain controls for each port
Send component video signals from a single A/V source to 4 televisions, monitors and receivers with this 1x4 1x4 Component Splitter with Gain Controls.

This 1x4 Component Splitter with Gain Controls has been designed to distribute a single component video source or composite video source with left and right audio to up to four viewing locations while maintaining the original signal strength after distribution. The 1x4 Component Splitter supports 480i, 720p, 1080i, and 1080p resolutions making it ideal for high definition signals. The 1x4 Component Splitter with Gain Controls can be looped, cascaded or put in tandem without loss of audio/video signals.

1x4 Component Splitter with Individual gain controls:

  • One input and four outputs
  • Individual gain controls for each component and composite video input port
  • Support analog right and left audio
  • Durable metal housing
  • Multiple units can be cascaded to provide more outputs
  • Low profile, wall mountable plastic housing
  • High signal bandwidth (400MHz)
  • Corrosion resistant gold connections
  • Includes power supply
  • One year warranty
  • Power: 9 Volt DC, 600mA
  • Power: Connection 2.5mm jack
  • Dimensions: 185W x 37H x 121D
  • Gain Adjustment: 4 Equalization Controls
  • Housing Plastic, Wall Mountable

Why not buy the 1x4 Component Splitter with Individual gain controls today?

1x4 Component Splitter Specifications:

Video
Video Impedance 75ohm
Gain 2 Volt unterminated
1 Volt terminated
Video Insertion Loss 50Hz to 10Mhz < 0.4dB
In to Out Isolation 50Hz to 10Mhz 32dB
Out to In Isolation 50Hz to 10Mhz 60dB
Return Loss 50Hz to 10Mhz 20dB
Video Bandwidth 150Mhz
Audio Response 100kHz

Audio
Gain Unity
Audio Input Impedance 22K ohms
Audio Output Impedance 1K ohms
THD 0.05% @ 1.0 Volts input level
Frequency Response 20Hz to 100KHz
Channel Separation >75dB @ 1KHz
In to Out Isolation 60dB
Out to In Isolation 60dB
Signal to Noise 100dB @ 2 Volts (out)
A/V Input and Output Jacks RCA type phono

This 1x4 Component Distribution Amp with Individual gain controls can split the outputs of the following and send it to 4 HDTV's:

  1. Any high definition Dish Network and DirecTV receiver with component outputs
  2. High definition TiVo' swith component outputs
  3. Any high definition cable receiver with component outputs
  4. Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with component outputs
  5. Any "Over The Air" (OTA) high definition receiver with component outputs
  6. WII, Sony PS2 and PS3, HD DVD and Blu-ray DVD players with component outputs
  7. Any Xbox360 with component outputs
  8. Any upconverting DVD player with component outputs
  9. Any DVHS VCR with component outputs
  10. An APPLE TV with component outputs
  11. Any PC video card with (Y-Pb-Pr, check your manual) component outputs
  12. Any high definition camcorder with component outputs
  13. Many A/V surround sound receivers with component switching.
  14. and other similar devices.