HDTV Supplys WolfPack 1 by 2 HDMI Splitter with 18 GBPS Bandwidth is an advanced solution for splitting a single HDMI input to two HDMI outputs. It provides high performance audio and video output through HDMI cables up to 4K2K@60Hz (YUV444) resolution and is capable of receiving and transmitting up to 18-Gbps of bandwidth with no data loss. Supporting the latest features you can be assured of reliable and high quality HDMI distribution. The WolfPack 1x2 HDMI Splitter w/Fast 18 GBPS Bandwidth supports HDMI 2.0a HDR Technology which increases the bandwidth from 10.2 Gbps to 18 Gbps. It also increases audio from 8 Audio Channels to 32 Audio Channels for expanded audio and includes Dynamic synchronization of both the video and audio data stream.
Our WolfPack 1x2 HDMI Splitter w/Fast 18 GBPS Bandwidth supports the latest 4K UHD TVs, the NVidia Shield and the latest graphics cards with HDMI 2.0s. To enjoy 4K 60Hz video be sure to use the TV′s HDMI port labeled with HDMI 2.0. HDMI 1.4 ports only support 4K at 30Hz.
WolfPack 1x2 HDMI Splitter w/Fast 18 GBPS Bandwidth Features:
- HR Compliant with HDR, HDMI 2.0a, HDCP 2.2 and DVI 1.0
- Supports a video format up to 4K2K@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2 and up to 4K2K@60Hz with 12bit YCBCR 4:4:4 plus below
- 480i@60Hz
- 480p@60Hz
- 576i@50Hz
- 576p@50Hz
- 720p@50/60Hz
- 1080i@50/60Hz
- 1080p@50/60Hz
- 1080p@24Hz 3D
- 720p@50/60Hz 3D
- 4K@60Hz
- Supports 3D frame sequential video format up to 1080p@60Hz
- Supports high resolution VESA mode video format up to QSXGA@60Hz
- Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
- Supports a smart EDID control
WolfPack 1x2 HDMI 2.0a Splitter Smart EDID Control Options:
- STD Mode: The WolfPack splitter will use its own built-in EDID and the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH Stereo. Use this mode if there are display issues in TV Mode.
- TV Mode: The splitter will read the EDID of the display connected to HDMI OUT 1. If it detects a 4K capable EDID it will transmit the signal in that format to all outputs. If no 4K capable EDID is detected then the splitter will output the best resolution that all displays can support.
Why not buy this 1x2 HDMI Splitter with 18 GBPS today?
WolfPack 1x2 HDMI Splitter w/Fast 18 GBPS Bandwidth Specs:
- Video Bandwidth: 600MHz/18Gbps
- Input Ports: 1 HDMI (Female type)
- Output Ports: 2 HDMI (Female type),
- Output Resolution : 480i ~1080p50/60, 4Kx2K@24/30 and 4k2k@60Hz
- ESD Protection: Human Body model: 8 kV (air-gap discharge) 4 kV (contact discharge)
- Power Supply: 5V/1A DC (US/EU standards, CE/FCC/UL certified)
- Dimensions: 56 mm (W) 100 mm (D) 16 mm (H)
- Weight: 165 g
- Chassis Material: Metal
- Operating Temperature: 0 蚓~40 蚓/ 32 蚌~104 蚌
- Storage Temperature: −20 èš“ ~ 60 èš“/−4 蚌 ~140 蚌
- Relative Humidity: 20~90 % RH (non-condensing)
- Power Consumption (Max): 5W
WolfPack 1x2 HDMI Splitter w/Fast 18 GBPS Bandwidth Contents:
- 1 - UHD 1x2 HDMI Splitter
- 1 - 5V at 1A DC Power adapter
- 1 - Operation Manual
Why not buy this 1x2 HDMI Splitter 18 GBPS today?
The older HDMI 1.4 compliancy supported 4K resolutions but only at 24 or 30 frames per second as well as HDMI 1.4 limits 4K content to 8-bit color. Our new HDMI 2.0 products can handle video up to a 4K at 60 frames per second and up to 18 gigabits per second assuring you of the finest 4K picture you can get. These HDMI 2.0a products are fully backward compatible with all previous HDMI version versions.
